Loa K-Array Firenze KS7 Loa K-Array Firenze KS7

Tính Năng Nổi Bật:

  • Loa 2 x 21".
  • Ampli class D / 2 x 3500W @ 2Ω.
  • Tần số: 25Hz - 120Hz.
  • Max SPL: 141dB.
  • Trọng lượng: 104.4kg.

Loa K-Array Firenze KS7

Giá bán: Đang cập nhật...

Khuyến Mãi : Giao hàng và lắp đặt miễn phí.

Hãng SX : K-ARRAY Mã Hàng : KS7

Thương Hiệu : Ý

Bảo Hành : 12 Tháng

Kho Hàng : Còn Hàng

Hỗ Trợ Online: Facebook Skype Zalo

Hỗ Trợ Mua Hàng: 0904.03.01.02 (Cả Chủ Nhật & Ngày Lễ)

Hướng dẫn mua hàng online

 General
Type  Subwoofer
Frequency Response  25 Hz – 120 Hz (-10 dB)
Power Handling  7000 W
Sensitivity  99.5 dB (1 W / 1 m)
Maximum SPL  138 dB (cont.) – 141 dB (peak)
Crossover  Internal DSP presets (120 Hz maximum)
Coverage  Omni
 Internal Processing
Input Sample Rate & Resolution  Up to 96 kHz @ 24 bit with internal SRC and jitter correction
Built-in DSP  Delay up to 2 s
Level and temperature remote monitoring
 Internal Amplifier Module
Type  2-ch. switch mode, Class D
Peak Output Power  2 x 3500 W @ 2 Ω 1% THD+N
Operating Range  100-240V AC, 50-60 Hz with PFC
Power Consumption  600 W @ 4 Ω load, Pink noise 1/8 rated power
Protections  Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Mains Connector  powerCON True with link inlet
 Controls & Connectivity
Controls  Remote control with dedicated PC software via ethernet connection
Connectivity Analog:
  1x XLR (bal) input signal
  1x XLR (bal) signal through
  Digital:
  1x XLR AES3
  2x Ethercon for remote control
 Handling
Dimensions (WxHxD) & Weight  1170 x 590 x 850 mm – 45.74 x 23.22 x 33.46 in
104.4 kg (230.16 lbs)
IP rating  20 (53 IP with K-AMPCOVER accessory)

 General
Type  Subwoofer
Frequency Response  25 Hz – 120 Hz (-10 dB)
Power Handling  7000 W
Sensitivity  99.5 dB (1 W / 1 m)
Maximum SPL  138 dB (cont.) – 141 dB (peak)
Crossover  Internal DSP presets (120 Hz maximum)
Coverage  Omni
 Internal Processing
Input Sample Rate & Resolution  Up to 96 kHz @ 24 bit with internal SRC and jitter correction
Built-in DSP  Delay up to 2 s
Level and temperature remote monitoring
 Internal Amplifier Module
Type  2-ch. switch mode, Class D
Peak Output Power  2 x 3500 W @ 2 Ω 1% THD+N
Operating Range  100-240V AC, 50-60 Hz with PFC
Power Consumption  600 W @ 4 Ω load, Pink noise 1/8 rated power
Protections  Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Mains Connector  powerCON True with link inlet
 Controls & Connectivity
Controls  Remote control with dedicated PC software via ethernet connection
Connectivity Analog:
  1x XLR (bal) input signal
  1x XLR (bal) signal through
  Digital:
  1x XLR AES3
  2x Ethercon for remote control
 Handling
Dimensions (WxHxD) & Weight  1170 x 590 x 850 mm – 45.74 x 23.22 x 33.46 in
104.4 kg (230.16 lbs)
IP rating  20 (53 IP with K-AMPCOVER accessory)

    ĐĂNG KÝ NHẬN TIN