Loa K-Array Mugello KH2 Loa K-Array Mugello KH2 Loa K-Array Mugello KH2 Loa K-Array Mugello KH2

Tính Năng Nổi Bật:

  • Loa active line array.
  • Ampli class D / 2 x 1000W @ 8Ω.
  • Tần số: 120Hz - 19kHz.
  • Max SPL: 136dB.
  • Trọng lượng: 29kg.

Loa K-Array Mugello KH2

Giá bán: Đang cập nhật...

Khuyến Mãi : Giao hàng và lắp đặt miễn phí.

Hãng SX : K-ARRAY Mã Hàng : KH2

Thương Hiệu : Ý

Bảo Hành : 12 Tháng

Kho Hàng : Còn Hàng

Hỗ Trợ Online: Facebook Skype Zalo

Hỗ Trợ Mua Hàng: 0904.03.01.02 (Cả Chủ Nhật & Ngày Lễ)

Hướng dẫn mua hàng online

 General
Type  Line array element
Transducers  2x 8” neodymium magnet woofer with 2.5” voice coil
  2x compression driver with 2.5” voice coil
Frequency Response 120 Hz – 19 kHz (-6 dB)
Maximum SPL 136 dB (peak)
Coverage  110° horizontal;
  20° vertical (preset dependent)
 Internal Processing
Input Sample Rate and Resolution  Up to 96 kHz @ 24 bit with internal SRC and jitter correction
Built-in DSP Input gain, delay up to 330 ms,
  8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
  FIR filter for electronic beam steering
  Onboard preset,
  Level and temperature remote monitoring
 Internal Amplifier Module
Type  2-ch., switch mode, class D
Peak Output Power  2x 1000 W @ 8 Ω 1% THD+N
Operating Range  100-240V AC, 50-60 Hz with PFC
Power Consumption  300 W @ 8 Ω load, Pink noise 1/8 rated power
Protections  Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
  Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Mains Connector  powerCON with link inlet
 Controls and Connectivity
Controls  Remote control with dedicated PC software via USB or RS485.
  Onboard touch screen display.
 Connectivity
Analog: Remote connectivity:
2x XLR (bal) input signal 1x XLR RS485 serial input
2x XLR (bal) parallel output 1x XLR RS485 serial output
Digital: 1x USB-B inlet
1x XLR AES3 input MAINS:
1x XLR AES3 output 1x powerCON
  1x powerCON link
 Handling
Dimensions (WxHxD)  860 x 370 x 210 mm (33.8 x 14.6 x 8.3 in) with rigging hardware
735 x 285 x 200 mm (28.9 x 11.2 x 7.9 in) net dimensions
Weight  29 kg / 63.93 lb (with rigging hardware)
IP rating  20 (53 with K-AMPCOVER accessory)

 General
Type  Line array element
Transducers  2x 8” neodymium magnet woofer with 2.5” voice coil
  2x compression driver with 2.5” voice coil
Frequency Response 120 Hz – 19 kHz (-6 dB)
Maximum SPL 136 dB (peak)
Coverage  110° horizontal;
  20° vertical (preset dependent)
 Internal Processing
Input Sample Rate and Resolution  Up to 96 kHz @ 24 bit with internal SRC and jitter correction
Built-in DSP Input gain, delay up to 330 ms,
  8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
  FIR filter for electronic beam steering
  Onboard preset,
  Level and temperature remote monitoring
 Internal Amplifier Module
Type  2-ch., switch mode, class D
Peak Output Power  2x 1000 W @ 8 Ω 1% THD+N
Operating Range  100-240V AC, 50-60 Hz with PFC
Power Consumption  300 W @ 8 Ω load, Pink noise 1/8 rated power
Protections  Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
  Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Mains Connector  powerCON with link inlet
 Controls and Connectivity
Controls  Remote control with dedicated PC software via USB or RS485.
  Onboard touch screen display.
 Connectivity
Analog: Remote connectivity:
2x XLR (bal) input signal 1x XLR RS485 serial input
2x XLR (bal) parallel output 1x XLR RS485 serial output
Digital: 1x USB-B inlet
1x XLR AES3 input MAINS:
1x XLR AES3 output 1x powerCON
  1x powerCON link
 Handling
Dimensions (WxHxD)  860 x 370 x 210 mm (33.8 x 14.6 x 8.3 in) with rigging hardware
735 x 285 x 200 mm (28.9 x 11.2 x 7.9 in) net dimensions
Weight  29 kg / 63.93 lb (with rigging hardware)
IP rating  20 (53 with K-AMPCOVER accessory)

    ĐĂNG KÝ NHẬN TIN