Loa K-Array Turtle KRM33
Loa K-Array Turtle KRM33 Loa K-Array Turtle KRM33

Tính Năng Nổi Bật:

  • Loa Active 3 x 3.15" - 1 x 6".
  • Công suất: 300W - 8Ω.
  • Tần số: 70Hz - 20kHz.
  • Kích thước: 10.3 x 26.6 x 30.2cm.
  • Trọng lượng: 5.2kg.

Loa K-Array Turtle KRM33

Giá: Đang cập nhật...

Khuyến Mãi : Giao hàng và lắp đặt miễn phí.

Hãng SX : K-ARRAY Mã Hàng : KRM33

Thương Hiệu: Ý

Bảo Hành : 12 Tháng

Kho Hàng : Còn Hàng

Gọi Mua Hàng: 0904.03.01.02 (Cả Chủ Nhật & Ngày Lễ)

 ACOUSTICS 
Power handling  180W (AES) 
Frequency range 70 Hz – 18 KHz +/- 3dB
100 Hz – 18 KHz +/- 3dB
SPL 1W/1mt  93 db 
Maximum SPL  115dB (cont) - 121dB (peak) 
 COVERAGE 
Horizontal DSP controlled (30° / 70° selectable)
Vertical  90° 
 CROSSOVER 
Type  DSP controlled 
Frequency 70 Hz minimum (preset dependent)
 TRANSDUCERS 
Type 3 X 3,15” Neodymiun cone driver with 1” voice coil
Type  1 X 6” passive radiator 
 SELECTION SWITCH 
Horizontal pattern  Spot – Flood 
Response  Bass Enhancer 
 AUDIO INPUT 
Analog connector 1 male + 1 female 3-pin balanced XLR
 REMOTE CONTROL INPUT 
Connector  1 USB type B
 POWER INPUT
Connector  2 x PowerCon IN/OUT
 AMPLIFIER
Type  1 module class D - DSP controlled
Nominal power output  2 X 125 W @ 4 Ω 1% THD + NOISE
Protection Dynamic limiter - Over current - Short circuit
Frequency response  20 Hz – 20 KHz, all load +/- 0.5 dB
Damping factor 8Ω, 100Hz  > 500
THD+N 1KHz, 1 W  0.003%
 AC POWER
Nominal voltage  115 / 230 Vac auto switching
Operating range 85 – 132 Vac 170 – 264 Vac 50 – 60 Hz
I. Nom  2 A / 115 Vac 1 A / 230 Vac
CONSUMPTION  85 – 265 Vac
Quiescent power (with no signal in)  10 W
1/8 rated power (pink noise) @ 4 Ω  110 W
Peak power  660 W / 120 ms
 CERTIFICATION
IP  40
 PHYSICAL OVERVIEW
Dimensions 26.6 x 10.3 x 30.0 cm (10.47” x 4.05” x 11.81”)
Weight  5.2 Kg (11.46 lb)

 ACOUSTICS 
Power handling  180W (AES) 
Frequency range 70 Hz – 18 KHz +/- 3dB
100 Hz – 18 KHz +/- 3dB
SPL 1W/1mt  93 db 
Maximum SPL  115dB (cont) - 121dB (peak) 
 COVERAGE 
Horizontal DSP controlled (30° / 70° selectable)
Vertical  90° 
 CROSSOVER 
Type  DSP controlled 
Frequency 70 Hz minimum (preset dependent)
 TRANSDUCERS 
Type 3 X 3,15” Neodymiun cone driver with 1” voice coil
Type  1 X 6” passive radiator 
 SELECTION SWITCH 
Horizontal pattern  Spot – Flood 
Response  Bass Enhancer 
 AUDIO INPUT 
Analog connector 1 male + 1 female 3-pin balanced XLR
 REMOTE CONTROL INPUT 
Connector  1 USB type B
 POWER INPUT
Connector  2 x PowerCon IN/OUT
 AMPLIFIER
Type  1 module class D - DSP controlled
Nominal power output  2 X 125 W @ 4 Ω 1% THD + NOISE
Protection Dynamic limiter - Over current - Short circuit
Frequency response  20 Hz – 20 KHz, all load +/- 0.5 dB
Damping factor 8Ω, 100Hz  > 500
THD+N 1KHz, 1 W  0.003%
 AC POWER
Nominal voltage  115 / 230 Vac auto switching
Operating range 85 – 132 Vac 170 – 264 Vac 50 – 60 Hz
I. Nom  2 A / 115 Vac 1 A / 230 Vac
CONSUMPTION  85 – 265 Vac
Quiescent power (with no signal in)  10 W
1/8 rated power (pink noise) @ 4 Ω  110 W
Peak power  660 W / 120 ms
 CERTIFICATION
IP  40
 PHYSICAL OVERVIEW
Dimensions 26.6 x 10.3 x 30.0 cm (10.47” x 4.05” x 11.81”)
Weight  5.2 Kg (11.46 lb)

    ĐĂNG KÝ NHẬN TIN