Loa K-Array Firenze KH8
Loa K-Array Firenze KH8 Loa K-Array Firenze KH8

Tính Năng Nổi Bật:

  • Loa 8 x 8" / 8 x 4" / 4 x 1.4".
  • Ampli class D / 8 x 2000W @ 4Ω.
  • Tần số: 60Hz - 18kHz.
  • Max SPL: 145dB.
  • Trọng lượng:  75.2kg.

Loa K-Array Firenze KH8

Giá: Đang cập nhật...

Khuyến Mãi : Giao hàng và lắp đặt miễn phí.

Hãng SX : K-ARRAY Mã Hàng : KH8

Thương Hiệu: Ý

Bảo Hành : 12 Tháng

Kho Hàng : Còn Hàng

Gọi Mua Hàng: 0904.03.01.02 (Cả Chủ Nhật & Ngày Lễ)

 ACOUSTICS
Power handling 2000 W(AES) + 800 W(AES) + 280W(AES)
Max Power 6160 W(AES)
Frequency range 60 Hz – 18 KHz (- 3dB)
SPL 1W/1mt
102.4 dB (Low) - 99.5dB (Mid) - 119 dB (High)
Maximum SPL 145 dB
 COVERAGE
Horizontal 120°
Vertical Digitally adjustable
 CROSSOVER
Frequency DSP controlled
300 Hz (Low-Mid); 1300 Hz (Mid-High)
 TRANSDUCERS
Full range 8 X 8” Neodymium magnet woofer with 2.5” voice coil
8 X 4” Neodymium magnet woofer with 1.5” voice coil
4 X 1.4” Neodymium magnet compression driver
with 1.5” voice coil
 REMOTE CONTROL & AUDIO IN/OUT
Connectors 1 Male + 1 Female LK25 connector (iP67)
Connection 1 Analog audio - 2 AES/EBU - Remote control over IP
 POWER INPUT
Connector
1 x PowerCon TRUE1 (iP65)
 AMPLIFIER
Type 2 Module class D with PFC - DSP controlled
Nominal Output Power 8 x 2000 W @ 4 Ω 1% THD + NOISE 
Protection Over Temp. (Power Limiting – Thermal Shutdown),
Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter,
High Frequency Protection
Frequency Response 20 Hz - 20 kHz (+0-1 dB) for 1 W @ 8 Ω
Damping factor 100 Hz > 10000
THD+N 1W to Full Power @ 4 Ω 0.2%
Thermal dissupation 1/4 of max output power @ 4 Ω = 2000 BTU/h (505Kcal/h)
Efficiency > 75% (typical)
1/8 rated power (pink noise) @ 4 Ω per channel 1250 W
 CERTIFICATIONS
Electronics 65
Speaker Box 45
 PHYSICAL
Dimensions (Per Unit) 117 cm x 50 cm x 20 cm (46.1” x 19.7” x 7.88”)

 ACOUSTICS
Power handling 2000 W(AES) + 800 W(AES) + 280W(AES)
Max Power 6160 W(AES)
Frequency range 60 Hz – 18 KHz (- 3dB)
SPL 1W/1mt
102.4 dB (Low) - 99.5dB (Mid) - 119 dB (High)
Maximum SPL 145 dB
 COVERAGE
Horizontal 120°
Vertical Digitally adjustable
 CROSSOVER
Frequency DSP controlled
300 Hz (Low-Mid); 1300 Hz (Mid-High)
 TRANSDUCERS
Full range 8 X 8” Neodymium magnet woofer with 2.5” voice coil
8 X 4” Neodymium magnet woofer with 1.5” voice coil
4 X 1.4” Neodymium magnet compression driver
with 1.5” voice coil
 REMOTE CONTROL & AUDIO IN/OUT
Connectors 1 Male + 1 Female LK25 connector (iP67)
Connection 1 Analog audio - 2 AES/EBU - Remote control over IP
 POWER INPUT
Connector
1 x PowerCon TRUE1 (iP65)
 AMPLIFIER
Type 2 Module class D with PFC - DSP controlled
Nominal Output Power 8 x 2000 W @ 4 Ω 1% THD + NOISE 
Protection Over Temp. (Power Limiting – Thermal Shutdown),
Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter,
High Frequency Protection
Frequency Response 20 Hz - 20 kHz (+0-1 dB) for 1 W @ 8 Ω
Damping factor 100 Hz > 10000
THD+N 1W to Full Power @ 4 Ω 0.2%
Thermal dissupation 1/4 of max output power @ 4 Ω = 2000 BTU/h (505Kcal/h)
Efficiency > 75% (typical)
1/8 rated power (pink noise) @ 4 Ω per channel 1250 W
 CERTIFICATIONS
Electronics 65
Speaker Box 45
 PHYSICAL
Dimensions (Per Unit) 117 cm x 50 cm x 20 cm (46.1” x 19.7” x 7.88”)

    ĐĂNG KÝ NHẬN TIN