General | |
Type | Subwoofer |
Frequency Response | 25 Hz – 120 Hz (-6 dB) |
Transducers | 2x 21” Neodymium magnet woofer with 5.31” voice coil |
Maximum SPL | 141 dB (peak) |
Crossover | Internal DSP presets (120 Hz maximum) |
Coverage | Omni |
Internal Processing | |
Input sample rate and resolution | Up to 96 kHz @ 24 bit with internal SRC and jitter correction |
Built-in DSP | Input gain, delay up to 330 ms, |
8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), | |
On-board preset, | |
Level and Temperature remote monitoring | |
Internal amplifier module | |
Type | 2 ch. switching-mode, class D |
Peak output power | 2 X 3500 W @ 2 Ω 1% THD+N |
Operating range | 100-240V AC, 50-60 Hz with PFC |
Power consumption | 600 W @ 4 Ω load , Pink noise 1/8 rated power |
Protections | Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, |
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection | |
Mains connector | powerCON True with link inlet |
Controls and Connectivity | |
Controls | Remote control with dedicated PC software via USB or RS485. |
On-board touch screen display. | |
Connectivity | |
Analog: | Remote connectivity: |
2x XLR (bal) input signal | 1x XLR RS485 serial input |
2x XLR (bal) parallel output | 1x XLR RS485 serial output |
Digital: | 1x USB-B inlet |
1x XLR AES3 input | MAINS: |
1x XLR AES3 output | 1x powerCON |
1x powerCON link | |
Handling and Finish | |
Dimensions (WxHxD) 4 | 1162 x 590 x 851 mm (45.7 x 23.2 x 33.5 in) |
Weight | 104.4 kg (230.16 lb) |
IP rating | 20 (53 with K-AMPCOVER accessory) |
General | |
Type | Subwoofer |
Frequency Response | 25 Hz – 120 Hz (-6 dB) |
Transducers | 2x 21” Neodymium magnet woofer with 5.31” voice coil |
Maximum SPL | 141 dB (peak) |
Crossover | Internal DSP presets (120 Hz maximum) |
Coverage | Omni |
Internal Processing | |
Input sample rate and resolution | Up to 96 kHz @ 24 bit with internal SRC and jitter correction |
Built-in DSP | Input gain, delay up to 330 ms, |
8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), | |
On-board preset, | |
Level and Temperature remote monitoring | |
Internal amplifier module | |
Type | 2 ch. switching-mode, class D |
Peak output power | 2 X 3500 W @ 2 Ω 1% THD+N |
Operating range | 100-240V AC, 50-60 Hz with PFC |
Power consumption | 600 W @ 4 Ω load , Pink noise 1/8 rated power |
Protections | Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, |
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection | |
Mains connector | powerCON True with link inlet |
Controls and Connectivity | |
Controls | Remote control with dedicated PC software via USB or RS485. |
On-board touch screen display. | |
Connectivity | |
Analog: | Remote connectivity: |
2x XLR (bal) input signal | 1x XLR RS485 serial input |
2x XLR (bal) parallel output | 1x XLR RS485 serial output |
Digital: | 1x USB-B inlet |
1x XLR AES3 input | MAINS: |
1x XLR AES3 output | 1x powerCON |
1x powerCON link | |
Handling and Finish | |
Dimensions (WxHxD) 4 | 1162 x 590 x 851 mm (45.7 x 23.2 x 33.5 in) |
Weight | 104.4 kg (230.16 lb) |
IP rating | 20 (53 with K-AMPCOVER accessory) |